Purification Technologies Comparison
Ion Generator Use Instructions:
- Insert the ion emitter; simply plug it into the opening in the top of
the ionizer. Push straight in; do not twist. If necessary, gently bend the
wires so that the tips are about 1 inch apart and at least 1 inch
above the top of the ionizer. Leave emitter in place.
- Place the unit in an open area of the room, away from other objects or
- Plug in your unit; you'll see the light on the front glow.
- If you almost touch the ion emitter with your ear, you should hear a
faint hiss. You should also feel a movement of air while you are near the
tips of the ion emitter. When it is dark, turn out the lights, and after a
few minutes (when your eyes become accustomed to the dark) you may be able
to see a small pinpoint blue glow on the tips of the emitter. The glow
will intensify as you move your hand close, and disappear for a few
seconds if you touch it. Your Negative Ion Generator is doing its job.
- Now walk away and enjoy the benefits of negative ions!
- To keep your ion generator working at peak efficiency, trim the ends
of the SSE emitter wires back 1/16" about once a month (once every 3
months for the new SSE emitters). A pair of wire cutters works fine. Just
hold it over a wastebasket and trim off the worn ends of the ion emitter
Trimming is never necessary for the optional CFE emitter.
- Do not burn candles while an ionizer
is in operation. Wax may build up on the emitter and other surfaces.
- Keep the unit clean!
All ion emitters on negative ion generators deteriorate. However, Comtech
Research has developed ion emitters on their negative ion generators which
are user- renewable! Simply trim the ends of the fine wires on the ion
emitter (on top of the unit) occasionally with a pair of wire cutters,
according to the
instructions, to keep the ion output at its peak. In addition, the
is replaceable. It plugs in to the top of the box. Replacement SSE ion
emitters only $9.95.
Our optional long-life CFE ion emitters are made from a high-tech,
space-age material that is virtually maintenance-free. The CFE emitter
requires no trimming, since the diameter of the fibers is almost
microscopically small (only 0.8 microns). And dusting off the emitter is
only needed 2 or 3 times a year. The CFE simply plugs into ionizer in
place of the standard SSE emitter as shown below.
Long-life, maintenance- free CFE ion emitters
are also available for only $29.95 each.